Digital Product Passport & Safety Information
EU Article 13(6) CompliantSelect Product Variant
Technical Specifications
- Model Identification NR9-WLIW-BT
- Color Ivory White
-
Dimensions
Headgear: 250×187×41 mm
Lightbox: 109×83×22 mm - Weight Total: 195g (Headgear: 85g, Lightbox: 110g)
- Connectivity Bluetooth BLE V4.2, 2.4GHz
- Materials ABS/PC Housing, Neodymium N52 Magnet
-
Optics & Light Array
9 LEDs (Full Spectrum, 4000K)
9 PMMA Lenses (45°) - Power Input Adapter 5V/1A – 5V/3A via USB-C
Battery Characteristics EU Compliance
| Battery Type | Li-ion Cylindrical Cell |
|---|---|
| Model | INR14430C |
| Nominal Voltage | 3.7V |
| Rated Capacity | 920mAh |
| Rated Energy | 3.4Wh |
| Charging Time | ~2.5 hours (0% to 100%) |
| Expected Lifespan | 2–3 years under regular use |
| User Replaceability | Replaceable by end-customer |
Chemical Composition Breakdown (For Recyclers & Technical Personnel)
Data Source: MSDS Report DSP26051411-1
Safety Precautions & Operating Rules
- Always keep eyes closed during active light sessions. Never look directly into the flashing LEDs.
- Photosensitivity Warning: Strobe light patterns may trigger seizures or photosensitive reactions, even in individuals with no prior history. Do not use if you have epilepsy or severe light sensitivity.
- Strictly intended for adults aged 18 and older. Not a medical device.
- Do not expose the device to direct sunlight, high heat (>60°C), or open flames.
- Do not submerge in liquids (IP20 ingress protection rating). Clean using damp cloths or water wipes only. Do not use ethyl alcohol or ammonium chloride.
- Eye/Skin Contact: Flush immediately with copious water for at least 15 minutes and seek medical attention.
- Inhalation: Move to fresh air immediately.
- Fire Suppression: Use water spray or fire extinguisher to cool adjacent batteries. Wear gas masks as burning battery chemicals emit pungent smoke.
End-of-Life, Repairer & Recycling Data
User Disposal & WEEE Directives
This product contains an integrated lithium-ion battery and electronic circuit boards. Under the EU WEEE Directive, it must not be disposed of as unsorted municipal waste. Please drop off depleted or retired units at designated municipal e-waste collection points or official battery collection bins.
🔧 Repairer & Recycler Dismantling Instructions
- Detach the Lightbox from the Headgear.
- Using a standard T4 Torx screwdriver, unscrew the 4 screws and remove the aluminum front cover from the Lightbox to access the internal printed circuit board (PCB).
- Disconnect the lithium-ion cell. Do not short-circuit terminal leads.
- Place extracted lithium-ion cells in dry, non-flammable containers for specialized hydrometallurgical material recovery.
- Replace with official battery, purchased from the NeuroVIZR web store (make sure to place the cell with correct polarity; negative on the left side, positive on the right side).
- Place the aluminum front cover back on the enclosure and secure the 4 screws.

